Branson designed their 20 SERIES tractors with rugged, dependability in mind. The company is owned by Kukje Manufacturing of South Korea, a leader in the field of agricultural equipment with over 50 years experience in design, development and manufacture of tractors and other heavy duty agricultural equipment.

General

• Drive System 4 Wheel Drive
• Steering Hydrostatic
• Clutch Dry, Single
• Battery 12V
• Brake Wet Disc

Engine

• Model A1700N2
• Type Vertical, 4 Cycle, Water Cooled, Diesel, EPA TIER CERTIFIED
• Combustion System Swirl Chamber
• Aspiration Naturally
• HP 35
• RPMs 2600
• No. of Cylinders 3
• Bore x Stroke 88 X 94 mm (3.46″ x 3.7″)
• Displacement 1714 cc
• Compression Ratio 21.3 : 1
• Air Cleaner Type Dry, Double Filter Elements
• Fuel Capacity 9.3 gal

Tires

• Front Tread 9.5×16 (AG20), 10×16.5 (IND20),
• Rear Tread 12.4×28 (AG20), 420/70×24 (IND20)

Dimensions

• Overall Length 130 in
• Overall Width 64 ~ 72 in
• Height with ROPS 98 in
• Wheelbase 70.9 in
• Ground Clearance 15 in
• Weight 4053 lbs

Transmission

• Type Hydrostatic
• Gear Shifting (F&R) HST x 3 Range
• Travel Speed (F&R) (F) 1.14 ~ 20 / (R) 1.09 ~ 19.1 MPH

PTO

• Type Independent P.T.O. (6 spline shaft)
• Speed 540 / 790 RPM
• Power 29 HP

Hydraulic System

• Type Position
• 3-Point Hitch Category I / Telescopic lower link / telescopic stabilizers
• Lift Capacity 3306 lbs
• Steering Pump Flow 4.9 (7cc)
• Main Pump Flow 9 (13cc)

Loader Specs

• Maximum Lift Height 104 in
• Clearance with Attachment Level 95 in
• Clearance with Attachment Dumped 78.2 in
• Reach at Maximum Height 20.4 in
• Reach with Attachment on Ground 67 in
• Maximum Dump Angle 46 degrees
• Attachment Rollback Angle 35 degrees
• Digging Depth Below Grade 1.8 in
• Overall Height in Carry Position 52.4 in
• Depth of Attachment (to back of inner shelf) 20.9 in
• Height of Attachment 20.9 in
• Depth of Attachment (to pivot pin) 19.6 in
• Lift Capacity to Full Height @ Pivot Pins 2701 lbs
• Breakout Force 3660 lbs
• Relief Valve Setting (loader control valve) 2532 psi
• Lift Cylinders 2.2 x 1.2 in
• Bucket Cylinder 2 x 1.2 in
• Bucket Specification 50 in