



















Overview
Whether you’re raising horses or heirloom tomatoes, the 10 series compact tractor, the newest in the Branson Tractor family, is prefect for you. This sleek utility tractor features a 24-HP Branson diesel engine. It’s perfect for both large landscape jobs as well as working in tight spaces around a hobby farm. Branson Tractors are designed with dependability in mind by our best at Branson Manufacturing of South Korea, a leader in the field of agricultural equipment with over fifty years experience. So, you can rest assured in knowing you’re getting a quality built tractor, assembled right here in the United States at our plants in Georgia, Oregon, and Texas.
Specifications
General
- Drive System – 4 Wheel Drive
- Steering – Hydrostatic
- Clutch -Dry, Single
- Battery – 12V
- Brake – Wet disc
Engine
- Model – A1100N2
- Type – 3 CYL, Water Cooled, Diesel
- Combustion System – Swirl Chamber
- Aspiration – Naturally
- HP – 24 HP
- RPMs – 3000 RPM
- No. of Cylinders – 3
- Bore x Stroke – 78 x 82 mm
- Displacement – 1175 cc
- Compression Ratio – 21 . 5 : 1
- Air Cleaner Type – Dry, Element
- Fuel Capacity – 6.08 gal
- Fuel Consumption – 0.067 (210 g/hp.hr)
- Engine Horsepower HP (kw) – 24 (17 .9) @2,600
- Engine HP – @ RPM 24 @ 3000
Capacity
- Fuel Tank – 6.08 gal
- Engine Crankcase – 1.14 gal
- Coolant – 1.32 gal
- Transmission case – HST: 37 (9.77)
Tires
- Front Tread – 45 in
- Rear Tread – 43.2 in
- AG 7-16, 11.2 – 20
- Ind 25 x 8.50 – 14, 14 – 17.5
- Turf 23 x 8.5 x 12, 33 x 12.50 x 16.5
Dimensions
- Overall Length – 122.9 in
- Overall Width – 53.9 in
- Height with ROPS – 91.4 in
- Wheelbase – 65.7 in
- Ground Clearance – 16.4 in
- Weight – 2,107 lbs
- Front Tread – 45 in
- Rear Tread – 43.2 in
Transmission
- Type – HST
- Gear Shifting – (F&R) F9 x R3/ 3 Range
- Travel Speed – (F&R) L-4.3, M-8.0 H-14.9 mph
- Main Shifting – Hydrostatic
- Forward Reverse Method – Hydrostatic, high low gear shift
- Gear Stages – (Front x Rear) F9 x R3
- Travel Speed Forward – HST: 3.9~12.1 mph
- Travel Speed Reverse – HST: 2.3~8.50 mph
PTO
- Type Live P.T.O. – (6 Spline shaft)
- Speed – 540 / 960 RPM Option: 2,500(Mid)
- Power – 18 hp
Hydraulic System
- Type Position – Control
- 3-Point Hitch – Telescopic lower link / Telescopic stabilizers
- Lift Capacity at Lift Point – 1,433 lbs@lift point
- Pump Capacity – 7.7 gal PM
- Total Flow GPM – 8.2
Loader Specifications
- Maximum Lift Height – 88.3 in
- Clearance with Attachment Level – 83.1 in
- Clearance with Attachment Dumped – 68.9 in
- Reach at Maximum Height – 15.5 in
- Reach with Attachment on Ground – 58.3 in
- Maximum Dump Angle – 43 degrees
- Attachment Rollback Angle – 38 degrees
- Digging Depth Below Grade – 4.2 in
- Overall Height in Carry Position – 45.7 in
- Depth of Attachment (to back of inner shelf) – 18.3 in
- Height of Attachment – 18.9 in
- Depth of Attachment (to pivot pin) – 23.1 in
- Lift Capacity to Full Height @ Pivot Pins – 1314 lbs
- Breakout Force – 1960 lbs
- Relief Valve Setting (loader control valve) – 2276 psi
- Lift Cylinders – 1.77 x 1.18 in
- Bucket Cylinder – 1.97 x 1.18 in
- Bucket Specification – 50 in
- Maximum Lift Height – 88.3 in
- Clearance with Attachment Level – 83.1 in
- Clearance with Attachment Dumped – 68.9 in
- Reach at Maximum Height – 15.5 in
- Reach with Attachment on Ground – 58.3 in
- Maximum Dump Angle – 43 degrees
- Attachment Rollback Angle – 38 degrees
- Digging Depth Below Grade – 4.2 in
- Overall Height in Carry Position – 45.7 in
- Depth of Attachment (to back of inner shelf) – 18.3 in
- Height of Attachment – 18.9 in
- Depth of Attachment (to pivot pin) – 23.1 in
- Lift Capacity to Full Height – 1314 lbs
- Breakout Force – 1960 lbs
- Relief Valve Setting (loader control valve) – 2276psi
- Lift Cylinders – 1.77 x 1.18 in
- Bucket Cylinder – 1.97 x 1.18 in
- Bucket Specification – 50 in